Author Topic: Norton DNS Public Beta for Windows & Mac  (Read 1136 times)

Offline javajolt

  • Administrator
  • Hero Member
  • *****
  • Posts: 36193
  • Gender: Male
  • I Do Windows
    • windows10newsinfo.com
Norton DNS Public Beta for Windows & Mac
« on: May 28, 2010, 03:33:30 AM »

Norton DNS Public Beta Setup for Windows

Check if your computer is using Norton DNS

To quickly determine whether or not your computer is currently using Norton DNS, go to http://setup.nortondns.com. The image will display a red X if your computer is not properly configured. Otherwise, if your computer is properly configured, a green check mark will be displayed.

Setup for Windows

To quickly install Norton DNS with the client software:

Coming Soon! Please use the manual instructions below until the client is ready.

To manually change your DNS settings to use Norton DNS:

1.Open the Control Panel from your Start menu.

2.Click Network Connections and choose your current connection.

3.On the General tab of the Connection Status screen, click Properties.

4.On the General tab of Connection Properties, scroll down and select Internet Protocol (TCP/IP), then click Properties.

5.On the General tab of Internet Protocol (TCP/IP) Properties, select Use the following DNS server addresses, then enter the two
NortonDNS IP addresses 198.153.192.1 and 198.153.194.1.

6.Click OK until each window is closed. You are now using NortonDNS.

To disable or uninstall Norton DNS

If you installed the Norton DNS client, simply uninstall it, and it will revert your DNS settings back to how they were previously.

If you performed a manual installation, follow the same instructions above, but on step five, select Obtain DNS server address automatically on the last screen (or replace our NortonDNS addresses with your recursive resolver IP addresses).

Norton DNS Public Beta Setup for Mac

Check if your computer is using Norton DNS

To quickly determine whether or not your computer is currently using Norton DNS, go to setup.nortondns.com. The image will display a red X if your computer is not properly configured. Otherwise, if your computer is properly configured, a green check mark will be displayed.

Setup for Mac

To quickly install Norton DNS with the client software:

Coming Soon! Please use the manual instructions below until the client is ready.

To manually change your DNS settings to use Norton DNS:

This is recommended only for advanced users.

1.Open System Preferences.

2.Click Network.

3.Choose your current network adapter, and click Advanced.

4.On the DNS tab, enter the two NortonDNS addresses 198.153.192.1 and 198.153.194.1.

To disable or uninstall Norton DNS

If you installed the Norton DNS client, simply uninstall it, and it will revert your DNS settings back to how they were previously.

If you performed a manual installation, follow the same instructions above, but on step four, remove the Norton DNS IP addresses (or replace them with your recursive resolver IP addresses).