Author Topic: Harddisk partition/format  (Read 1832 times)

Offline riso

  • Administrator
  • Hero Member
  • *****
  • Posts: 6406
  • Gender: Male
  • Beta tester Tech support dedicated 110%
    • windows 10 news and info | Forum - Blog
Harddisk partition/format
« on: February 20, 2009, 06:56:16 AM »
When the drive is brandnew You have to attach it to the computer as the only drive so take the cables from the existing old drive of.

Restart the pc with a Windows cd/ dvd  inserted and after a little while You get the option to format, choose quick format... at the moment that the cd starts to copy Windows files reset the pc with taken out Windows cd/ dvd.

Attach the cables again to the old drive this should be the Master drive and make the new drive slave....
restart the pc Windows is now able to see the drive.

When You don't do these steps normally Windows is not able to see the drive because Fdisk was not done.

When You used already the ''new'' drive than You may do what the former comments told You just let Windows/ diskmanagement see the disk.

riso