Author Topic: Booting problem after installation (CLASSPNP.SYS)  (Read 2361 times)

Offline sfeone

  • Newbie
  • *
  • Posts: 5
Booting problem after installation (CLASSPNP.SYS)
« on: July 17, 2009, 06:47:48 AM »
Today I installed Windows 7 Build 7600 (32bit) on my laptop.
In fact, I installed several times with a variety of Builds and
I have never got such a problem before.

But, today this one got the blue screen and repeatedly rebooting.
When I chose the Safe Mode, I could see the screen holding at
the point of CLASSPNP.SYS and then again rebooting!!

I do not know how to resolve this problem. Although I tried to reinstall
it, I had the same problem and still I am in a desperate mood.

Please help me install it successfully.

Thank you.

Offline javajolt

  • Administrator
  • Hero Member
  • *****
  • Posts: 36193
  • Gender: Male
  • I Do Windows
    • windows10newsinfo.com
Re: Booting problem after installation (CLASSPNP.SYS)
« Reply #1 on: July 17, 2009, 07:37:30 AM »
if you have another hard drive, remove the trouble one and replace it with a different one.  reinstall perhaps build 7100 or even go back to vista or xp.  then install the troubled hdd as a slave and try reading it, if this fails perform a low format on the troubled hdd, and then start over with it.


Offline hannahsh

  • Newbie
  • *
  • Posts: 12
Re: Booting problem after installation (CLASSPNP.SYS)
« Reply #2 on: July 28, 2009, 07:38:49 PM »
Hi there

First off I have learned from bitter experience to install XP on a 5Mb partition before installing Vista or Windows 7 and using it to backup any working version of other. Also means MBR (Master Boot Record) is older and therefore always (one hopes haha) compatible.

I have had problems with certain computers (Intel CPU) that simply wont load WIndows 7, even changed mobo no difference. HOwever on AMD chips by reinstalling XP first and recreating partition tables etc this appears to work - sometimes WIndows7/Vista will do it but its not a guarantee.

Put you XP disk in delete all partitions create small one for XP and install and then let WIndows 7 do its own thing when ready - then install backup app and when or IF windows 7 works BACK IT UP,

Also the upgrade advisor is completely useless !! BE warned if you dont already know, it dont work.