Author Topic: Build 7260 Upgrade  (Read 3878 times)

Offline MrMonk

  • Newbie
  • *
  • Posts: 9
  • Gender: Male
  • Apologize for nothing...
Build 7260 Upgrade
« on: June 24, 2009, 04:24:19 PM »
Hi all! Last night I burned the ISO for build 7260 from Utorrent. I attempted to upgrade (from within windows) build 7201 that is currently running on my system and got this error message:

"The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. 


Your current version of Windows is more recent than the version you are trying to upgrade to. Windows cannot complete the upgrade.

Any suggestions?

Mr Monk

"You may do and say as you please, so long as you apologize for nothing"

Offline vastac13

  • Jr. Member
  • **
  • Posts: 63
  • Gender: Male
  • "why use if it's still broken?"
Re: Build 7260 Upgrade
« Reply #1 on: June 24, 2009, 04:44:43 PM »
probably the one you dled are fake and are build <7201

vastac13

Offline mazzie

  • Newbie
  • *
  • Posts: 38
  • Gender: Male
Re: Build 7260 Upgrade
« Reply #2 on: June 24, 2009, 05:43:40 PM »
Hi all! Last night I burned the ISO for build 7260 from Utorrent. I attempted to upgrade (from within windows) build 7201 that is currently running on my system and got this error message:

"The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. 


Your current version of Windows is more recent than the version you are trying to upgrade to. Windows cannot complete the upgrade.

Any suggestions?

Mr Monk




Hi there,

Yes, you can upgrade. Just start the setup.exe in the compatibility mode as Vista Service Pack 2.

The Upgrade went good for me with this method.

Mazzie 8)
Pentium IV 3.0 Ghz Dualcore 2 GB Ram
Ati Radeon X1050 256mb
180 GB HD
Windows 7 x86 build 7600 OEM activated and licenced
Dualboot W7clean/W7 upgrade
HUP FCTwente

Offline Snuffy

  • Hero Member
  • *****
  • Posts: 381
  • Gender: Male
Re: Build 7260 Upgrade
« Reply #3 on: June 25, 2009, 01:06:22 AM »
There are several  good  version of 7260 - RTM. on torrents.
If you install does not work. suggest you give actual name of your download.
I know the download (vasill) is one of the good one.
also the downloads by SoLoR ( are good)
I make my own .iso using the .vhd downloads...
« Last Edit: June 25, 2009, 01:08:28 AM by Snuffy »
The only STUPID Question is the one you never asked.

Offline MrMonk

  • Newbie
  • *
  • Posts: 9
  • Gender: Male
  • Apologize for nothing...
Re: Build 7260 Upgrade
« Reply #4 on: June 25, 2009, 03:45:12 AM »
I suspect that "Vastac13" is correct in assessing that the version that I downloaded from Utorrent (7260.0.x86fre.win7_rtm.090612-2110.client_en-us.ultimate.SoLoR-custom) is an older build with a new build number. It would be nice if we stuck with what is released from microsoft, instead of trying to be creative and wasting our time and preying on our enthusiasm.

Mr Monk
"You may do and say as you please, so long as you apologize for nothing"

Offline MrMonk

  • Newbie
  • *
  • Posts: 9
  • Gender: Male
  • Apologize for nothing...
Re: Build 7260 Upgrade
« Reply #5 on: June 25, 2009, 03:50:52 AM »
Mazzie, thanks, I will try your method!!

Mr monk
"You may do and say as you please, so long as you apologize for nothing"

Offline joshoon

  • Newbie
  • *
  • Posts: 47
  • I only live to produce music.
Re: Build 7260 Upgrade
« Reply #6 on: June 26, 2009, 02:14:57 PM »
It's just because that are custom made iso's.
Since a week (or something) there is a untouched iso released, with that one you are able to upgrade with.
that iso is released on NZB, but I didn't see it on torrents yet.

Offline Snuffy

  • Hero Member
  • *****
  • Posts: 381
  • Gender: Male
Re: Build 7260 Upgrade
« Reply #7 on: June 26, 2009, 09:49:32 PM »
I opinion on that: Custom made .iso  they really are good. but most of them are lacking in the fact that:
1.  every body uses the same CUSTOM made version
2.  If you first use custom by SoLoR, then stick with only SoLoR versions.
3.  Longhorn might use a different (custom Mod ) so it will only up[grade from
     a special version.
Sample: 1 version stated 7620 on 7229 (loader) now that version was not modifed  from the original .VHD used to make 7229.iso
which was OEM version, and many ppl (do not read) because the popus says, we have to reboot to change system files so we can continue. If you do not READ and seems that 80 to 90% failed to unstand files were changed to mod from RETAIL. 7201 or lower to BE OEM.

2.  The other person modified his version to /cmd echo off /reboot and it auto rebooted.
2a, it then continued untill about the last then failed.  because the cversion was still set to only upgrade form v7201. many ppl already had 7213.

I make my own ISO's so I can modify them to suit what I need.  I also set and watch almost every thing that popsup on my screen.
Stupid, NO I'm a 10 yr RETIRED COMPUTER REPAIR TECH - Plus Shop Owner. for 20 yrs.
 please note some of the different cversions.ini and EI.cfgs

(cversion.ini) checks to see what version it can upgrade too.
#1
[HostBuild]
MinClient=7077.0
MinServer=7100.0

#2
[HostBuild]
MinClient=7077.0
MinServer=7201.0

#3
[HostBuild]
MinClient=7100.0
MinServer=7229.0

#4
[HostBuild]
MinClient=7260.0
MinServer=7100.0

Now some mods have EI and some do not:
[EditionID]
Ultimate
[Channel]
OEM
[VL]
0
that version will only upgrade if allowed OEM only.

[EditionID]
Ultimate
[Channel]
RETAIL
[VL]
0
this allows upgrade from Retail _ Store bought.

Now depending on how the CVersion is written, it says Hey, Install and reset if needed any files needed to change for RETAIL to OEM or OEM back to RETAIL.

So please remember if you using Tommys .iso  do not try to upgrade with Boddies versions or Solors version or SoLoRs version.
If you want to CLEAN Install, YOU can use anybodys you want... they work 99.8% of the time.

PS: SoLoR is a real person - and he is not the same as Solor or Solar. all three are real.
just as there are more than 1-one Snuffy or snuffy



The only STUPID Question is the one you never asked.

Offline MrMonk

  • Newbie
  • *
  • Posts: 9
  • Gender: Male
  • Apologize for nothing...
Re: Build 7260 Upgrade
« Reply #8 on: June 27, 2009, 03:25:10 AM »
Hi All!  Snuffy, I understand your opinion, I also have been programming and repairing computers for 17+ verifiable years. It is NOT a reading issue. The CVERSION on the ISO (7260.0.x86fre.win7_rtm.090612-2110.client_en-us.ultimate.SoLoR-custom) image is:

 [HostBuild]
MinClient=7077.0
MinServer=7000.0

If you make a custom ISO, why would you not update the CVERSION file to reflect your build number? This obviously is a 7077 build dressed up as a 7260. Personally, I could understand why, as a "Custom ISO" builder you would take offense. As a Beta Tester I feel it is my responsibility to question and inform others so their time won't be wasted as mine was.

Mr Monk

"You may do and say as you please, so long as you apologize for nothing"

Offline Snuffy

  • Hero Member
  • *****
  • Posts: 381
  • Gender: Male
Re: Build 7260 Upgrade
« Reply #9 on: June 27, 2009, 07:47:25 PM »
The version of .vhd i used was untouched.vhd (best i can tell). I modified the cversion to:
[HostBuild]
MinClient=7260.0
MinServer=7000.0

where as this allowed me to upgrade from 7229 to 7260. Other wise I was simply told I had a newer version than this version.
I was upgrading the Client not the Server.    That was my reason, and several (other forums) were unable to update from 7229 or 7231. but 7201 or less upgraded just fine.   Many ppl to day are using the (install in Admin mode and Vista SP2 compatibility mode)
which disables all extras.  Now also you might check and see also that any removed the EI.cfg. where as they also removed all but Ultimate.cfg  - several iso also had  removed:

EI.cfg
[EditionID]
Ultimate
[Channel]
OEM (change to Pro then try to install.)
[VL]
0
 or changed to
[EditionID]
Ultimate
[Channel]
RETAIL
[VL]
0
-------------------------------------------------------

As many will see several (iso makers) have used the Server to make Client, while some used the Client to remake Client.
Different Strokes for Different Folks.   Simply have to wait (honestly to see what RTM really is)
you do know that one version was actually released as PRO, but seems they never released a KEY for Pro.

The Fun of it all.
The only STUPID Question is the one you never asked.

Offline MrMonk

  • Newbie
  • *
  • Posts: 9
  • Gender: Male
  • Apologize for nothing...
Re: Build 7260 Upgrade
« Reply #10 on: June 28, 2009, 05:34:29 PM »
Thanks Snuffy, I have been busy at the shop with virus removals and reloads. I located a Windows 7 image at Piratebay.org,
(WINDOWS 7 BUILD 7260 WIN7 RTM X86 DVD MULTI_LANGUAGE_Ultimate+Virtual+localpacks+DreamScene(by TelovozWAREZ)) which upgraded build 7201 without a hitch. The upgrade was quick and easy. all files transfered completely. My systems info is as follows:

OS Name   Microsoft Windows 7 Ultimate
Version   6.1.7260 Build 7260
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name   XXXXXXX
System Manufacturer   ECS
System Model   G31T-M
System Type   X86-based PC
Processor   Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz, 2493 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date   American Megatrends Inc. 080014, 6/29/2007
SMBIOS Version   2.5
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume2
Locale   United States
Hardware Abstraction Layer   Version = "6.1.7260.0"
User Name   xxxxxxx
Time Zone   Central Daylight Time
Installed Physical Memory (RAM)   2.00 GB
Total Physical Memory   1.99 GB
Available Physical Memory   1.02 GB
Total Virtual Memory   3.98 GB
Available Virtual Memory   2.74 GB
Page File Space   1.99 GB
Page File   C:\pagefile.sys

I dual boot with two seperate drives, one with Vista and one with Win7

Mr Monk
"You may do and say as you please, so long as you apologize for nothing"