Author Topic: A look back In Time At Some Vintage Computers  (Read 4534 times)

Offline javajolt

  • Administrator
  • Hero Member
  • *****
  • Posts: 36193
  • Gender: Male
  • I Do Windows
    • windows10newsinfo.com
A look back In Time At Some Vintage Computers
« on: September 21, 2010, 06:55:35 PM »



ENIAC Tubes, 1944



Commonly regarded as the first electronic digital computer ENIAC (Electronic Numerical Integrator and Computer), was developed at the end of World War II to help the U.S. maintain its technological edge over its perceived enemies. It cost $500,000 and incorporated 18,000 tubes.

NEAC 2203, 1960



Manufactured by the Nippon Electric Company (NEC), the drum-based machine was one of the earliest transistorized Japanese computers. It was used for business, scientific and engineering applications.

Punch Card and Model 077 Collator, 1937



Developed by the IBM Corporation for the Social Security Administration, the machine could compare two groups of punched cards (each one representing a single individual) and merge them into correct numerical or alphabetical order.



Built at the University of Wisconsin, WISC (Wisconsin Integrally Synchronized Computer) was able to perform four arithmetic equations at once, a unique feature for the time. It cost $50,000 and had a memory of 1K.

SAGE, 1954



A gigantic computerized air defense system, SAGE (Semi-Automatic Ground Environment) was designed to help the Air Force track radar data in real time. Equipped with technical advances such as modems and graphical displays, the machine weighed 300 tons and occupied one floor of a concrete blockhouse.

ENIAC Wiring, 1944



Although it could perform 5,000 operations per second, ENIAC did not have the capacity to store programs and hence had to be rewired for every job.

Johnniac, 1954



Inspired by a design by John von Neumann, a scientist at Princeton's Institute for Advanced Study, Johnniac cost $470,000 and featured a memory of 4K.

PDP-8, 1965



Manufactured by the Digital Equipment Corporation, the PDP-8 was the first successful mass-produced minicomputer. Its relatively low price ($18,000), desktop packaging, and simple programming model expanded the market for computers in universities, laboratories, and offices.

Philco 212 Transistor Boards, 1962



An early commercial product designed for scientific, real-time, and data processing applications, the Philco machine cost $1.8M and boasted a memory size of 64K.

Core Memory



Cores are rings of ferrite suspended in a grid of wires (visible in the right third of this frame). A charge to a point on the grid magnetizes the ring in a clockwise or counter-clockwise direction, which corresponds to a one or a zero: one bit. Because it holds its state, core memory is able to retain information even when the electricity is turned off, thereby paving the way to modern computing.

IBM 360 Tape Drives, 1968



These memory storage devices were one of the peripherals developed by IBM to service its System/360 family of machines, which was the first ever to allow users to enlarge or shrink their stable of machinery without having to purchase new software.

CDC 6600



For a time the fastest machine in the world, Control Data Corporation's 6600 machine was designed by noted computer architect Seymour Cray. It retained its speed crown until 1969, when Cray designed his next supercomputer.

CDC 160A Button Array, 1962



Also designed by Cray for the Control Data Corporation, the CDC 160A was mostly used for dedicated control applications such as operating typesetting machines and mechanical lathes.

IBM 7030 Stretch, 1961



A precursor the System/360 the 7030 was IBM's first attempt to create a supercomputer. It was developed for the Los Alamos National Laboratory.

Neiman Marcus Kitchen Computer, 1969



Marketed to housewives for the storage of recipes, the Kitchen Computer appeared in the Neiman Marcus 1969 catalogue, at a retail price of $10,600. It did not have a keyboard; its user interface consisted of binary lights and switches. There is no evidence that any ever sold.

Commodore 64 Home Computer Keyboard, 1982



Featuring powerful audio visual capabilities, the 64 was originally developed by Commodore as a programmable engine to support arcade games. As a home computer, it was less expensive than comparable machines and eventually sold more than 30 million units.

Osborne 1 Portable Computer, 1981



The first commercial portable computer weighed 24 lbs. and cost less than $2,000. It gained popularity because of its low price and the extensive software library that came with it.

Apple I, 1976



Initially conceived by Steve Wozniak (a.k.a. "Woz") as a build-it-yourself kit computer, Apple I was the precursor to the immensely popular Apple II. Along with friend Steve Jobs, Wozniak sold 50 of the units to a shop in Mountain View, Calif. The suggested retail price: $666.

Cray-3 Bundles, 1993



Seymour Cray has spent a lifetime designing the world's fastest and most powerful computers. The Cray-3 was the third in the line of supercomputers developed by his namesake company.