I just got off the phone with Jeremy at Remotely Anywhere, and he said there will not be offical Windows 7 support until version 10 is released next month sometime.
He suggessted to check the following,
How can I access RemotelyAnywhere on a machine behind a firewall?
In order to access a computer that is behind a router you need to map one of the router's ports to the IP address and port of the machine on which you are running RemotelyAnywhere.
From outside your LAN, you would gain access to the computer running RemotelyAnywhere by entering the router's IP address and the port to which the desired machine is mapped. Example: ROUTER: External IP address: 111.111.111.111
RemotelyAnywhere machine: IP address: 192.168.0.10, Port: 2000 (port 2000 is the default but this can also be changed)
STEP 1) Map a port from the router to the computer. In this case, you could pick a port on the router (say, 5200) and map it to 192.168.0.10:2000.
Mapping ports from routers to computers is router-specific. Usually your router will have a web-based interface that allows you to configure and maintain it. Sometimes router companies refer to this action as 'Port Forwarding', Port Mapping', 'Opening a Pinhole', and 'Port Range Forwarding.'
STEP 2) Having done the above, you will now be able to fully access the RemotelyAnywhere computer with the URL
http://111.111.111.111:5200 or
http://111.111.111.111:5200 - that is, the router's external IP and the port you mapped to the RemotelyAnywhere machine.
How can I access a machine with a dynamically assigned IP address?
To access a computer using RemotelyAnywhere, you may need to know the IP address of the computer. The fact that your ISP dynamically assigns an IP address is not the problem, rather it is making sure that you know the new IP address whenever it is assigned to the computer you want to access.
You can configure RemotelyAnywhere to send you an e-mail whenever your IP address changes, so you always know where to connect. This is under Preferences > Network. Please bear in mind that in order to use this feature you also need to configure your SMTP settings in the same dialog.
Alternatively, dynamic DNS Solutions such as
www.no-ip.com are often free. This service allows you to create a logical name for your computer (which is a fully qualified domain name) and then maps the dynamic IP address back to the logical name. A small application runs on your computer and automatically updates no-ip.com any time your IP address changes. Our resident security expert has been using it for a long time with no problems.
You would then access your computer using RemotelyAnywhere by entering the logical name and port into your web browser. Example:
» Define a computer Logical Name with a Dynamic DNS solution:
www.home445533.com » RA defined port: 2000
» Access RemotelyAnywhere by entering
http://www.home445533.com:2000 and this would work even if the IP address were to change.